Wyoming Lane Position and Space Management Practice Questions

Lane Position and Space Management questions

1. 1. How many lane positions does a motorcycle have within a single lane?

   1. A. Three: left, centre, right
   2. B. One, in the centre
   3. C. Two, left and right only

   Answer: A — Three: left, centre, right

   Riders use three positions within the lane to manage visibility, space, and surface conditions.

2. 2. Which part of the lane is often the most slippery?

   1. A. The left wheel track nearest the centre line
   2. B. The right-hand edge beside the shoulder
   3. C. The centre strip where oil and grease collect

   Answer: C — The centre strip where oil and grease collect

   Dripped oil accumulates where the engine sump of cars passes, which is the centre of the lane.

3. 3. What is the main reason to change lane position while riding?

   1. A. To indicate you want to be passed
   2. B. To be seen and to avoid hazards
   3. C. To signal an intention to turn

   Answer: B — To be seen and to avoid hazards

   Lane position is a continuous adjustment for sight lines, surface, and escape routes.

4. 4. What should a rider do when being followed too closely?

   1. A. Increase the space ahead of them
   2. B. Brake sharply to warn the driver
   3. C. Speed up to open a gap behind

   Answer: A — Increase the space ahead of them

   More room in front is the only space a rider controls when someone tailgates.

5. 5. What is the purpose of the SEE strategy?

   1. A. To set engine speed correctly
   2. B. To check equipment before riding
   3. C. Search, evaluate, and execute

   Answer: C — Search, evaluate, and execute

   SEE is the standard risk-management process taught to riders: search for hazards, evaluate them, and execute a response.

6. 6. How should a rider complete a pass on a two-lane road?

   1. A. On the paved shoulder to the right side
   2. B. In the other lane, after a blind-spot check
   3. C. Within the same lane, close alongside

   Answer: B — In the other lane, after a blind-spot check

   A motorcycle passes exactly as a car does: in the adjacent lane, returning when there is proven room.

7. 7. What should a rider be alert to when being passed by a car?

   1. A. Wind blast and an early return
   2. B. The car's exhaust temperature
   3. C. Reduced engine power

   Answer: A — Wind blast and an early return

   Turbulence and an early return are the two main hazards when a larger vehicle passes a motorcycle.

8. 8. Which lane position is usually best when following another vehicle on a dry road?

   1. A. Always the centre
   2. B. Always the far right
   3. C. The one giving the best view

   Answer: C — The one giving the best view

   Position is chosen for sight lines and conspicuity, and changes as conditions change.

9. 9. What should a rider do when a vehicle merges into their lane?

   1. A. Brake hard immediately
   2. B. Adjust position or speed to restore space
   3. C. Hold position and sound the horn

   Answer: B — Adjust position or speed to restore space

   A rider's first tool is space, and there is usually room within the lane to create it.

10. 10. How should a rider position within the lane when passing parked cars?

    1. A. Toward the left of the lane
    2. B. Close to the parked cars
    3. C. In the centre of the lane

    Answer: A — Toward the left of the lane

    The door zone extends several feet, and a rider has no crumple zone.

11. 11. When should a rider take the centre of the lane?

    1. A. Whenever the road is wet
    2. B. Only on interstates
    3. C. Where it discourages sharing

    Answer: C — Where it discourages sharing

    Claiming the lane is a legitimate tactic where a car might otherwise attempt to squeeze past.

12. 12. Why does a rider need more following distance at night?

    1. A. Traffic is faster at night
    2. B. Surface hazards are harder to see
    3. C. Brakes work less well at night

    Answer: B — Surface hazards are harder to see

    Reduced sight distance means hazards appear later, so more space is needed to respond.

13. 13. What should a rider do when boxed in by traffic on all sides?

    1. A. Adjust speed to open a gap
    2. B. Maintain position and speed
    3. C. Brake hard to fall back

    Answer: A — Adjust speed to open a gap

    Having no escape route is the situation a rider should never accept for long.

14. 14. How far ahead should a rider be scanning?

    1. A. Two seconds ahead
    2. B. At the vehicle directly in front
    3. C. About 12 seconds of travel

    Answer: C — About 12 seconds of travel

    A long scan gives time to plan a line and a response rather than react.

15. 15. What does the evaluate step of the SEE strategy involve?

    1. A. Checking the fuel remaining
    2. B. Judging what a hazard could become
    3. C. Counting the vehicles ahead of you

    Answer: B — Judging what a hazard could become

    Evaluation turns a noticed hazard into a predicted outcome that a response can address.

16. 16. What should a rider check before returning to the lane after a pass?

    1. A. That the vehicle shows in the mirror
    2. B. That the road ahead is straight
    3. C. That the passed driver has flashed their lights

    Answer: A — That the vehicle shows in the mirror

    Mirror visibility of the whole vehicle confirms there is enough room to move back in.

17. 17. What space cushion does Wyoming require?

    1. A. At least three seconds
    2. B. At least four seconds
    3. C. At least two seconds

    Answer: C — At least two seconds

    Double or triple it when the weather is bad or the pavement is slick.

18. 18. What does Wyoming require on a two-lane road when passing a stopped emergency vehicle on a motorcycle record?

    1. A. Nothing in particular is required
    2. B. Reducing speed by at least 20 mph
    3. C. Stopping completely until it clears

    Answer: B — Reducing speed by at least 20 mph

    On an interstate the rider moves over instead.